Temperature testing cabinets WT and climatic testing cabinets WK

WT and WK are economical standard testing systems of the latest generation for temperature and climatic testing.

Test space volume 180 … 1,500 l
Temperature range -70°V … +180°C
Humidity range 10 … 98 % r.h.

Climatic testing cabinets WK 111 production series

For the simulation of the different seasons and of the different climatic zones of the world, in particular for long-time and accelerated stability testing.

Test space volume 180 … 1,500 l
Temperature range -10°C … +90°C
Humidity range 10 … 98% r.h.

Cold/ Heat climatic test chambers KWP production series

Cost-effective standard devices with test space volumes of 64, 120, 240 and 450 l. The devices are preferably used for temperature testing at temperatures ranging from –70°C to +130°C without special requirements with regard to temperature change rate.

Test space volume 64, 120, 240 and 450 l
Temperature range -70°C to +130°C

For testing of air bag modules and their components. Circular design with wide-opening test space shell for complete documentation of the activation of the air bag with high-speed cameras.

Test space volume ca. 10 m³
Temperature range -40 ... +125 °C
Temperature constancy ±1 K

With automatically opening test space door, cable remote control and safety locking system.

Temperature range -70 ... +150 °C
Climate range +10 ... +85 °C
Humidity range 10 … 95°C r.h.
Test space volume 500 l

Temperature shock test chambers for simulating the high thermal values required by testing standards in the electronics industry which require building components to be exposed to changes in
temperature from –80 to +220°C within seconds

Facilitate controlled improvement of the reliability of technological products by enabling the user to detect and remove the cause of
faults early on.

Test space volume 180 ... 1.300 l
Temperature range -70 ... +180 °C
Climate range +10 ... +95 °C
Humidity range 10 … 98% r.h.
Temperature change rates 5/10/15 K/min

Salt spray test chambers SC

Salt spray test chambers and alternating corrosion testing chambers for carrying out corrosion testing with salt spray, condense water and standardized climate

Systems for the simulation of exposure to climate, rain or acid rain in conjunction with global radiation in the spectral range from 290 to 450 nanometres.

For simultaneous testing of the influence of vibration, temperature and temperature changes as well as humidity, e.g. on components in the engine bay of vehicles.

With a closed floor element these cabinets can be used as fully functional temperature testing cabinets (WTV series) and, additionally, as climate test cabinets (WKV series)
as well as for ESS testing.

Temperature range -70 ... +180 °C
Climate range +10 ... +95 °C
Humidity range 10 ... 95 % r.F. (1)

(1) These values apply to operation with the closed floor element.

For components and devices used in aviation and space
industries as well as in meteorology.

Temperature range -70 ... +180 °C
Climate range +10 ... +95 °C
Humidity range 10 ... 95 % r.F.
Pressure range Patm ...5 mbar

According to DIN VDE 0470 T1 or EN 60529 for testing to protection classes IPX3 and IPX4. Ingression of water into enclosures is tested.

According to DIN VDE 0470 T1 or EN 60529 for testing of the protection classes IP 5 X and IP 6 X. The ingression of dust into enclosures is tested.

For testing functioning and tightness in a particle-intensive
dust-laden atmosphere as per DIN VDE 0470 part 1 (EN 60529). In addition to external covering with dust, a vacuum is created within the specimens so that ingression of dust can be.

Test space volume 8 m³

For the simulation of the various seasons and of the different climatic zones of the world, in particular for long-term and accelerated stability testing.

Test space volume 180 ... 1.500 l
Temperature range -10 °C ... +90 °C
Humidity range 10 ... 98 % r.F.

Designed and optimised for stability testing of pharmaceutical products in accordance with the valid ICH guideline.

Temperature range 600...2000 °c
Climate range +10 °c ... +50 °c
Humidity range 30% … 90% r.h.

For the simulation of the different climatic zones of the world for long-time and accelerated stability testing.

Test space volume 3...300 m3
Temperature range +20 °c ... -45 °c
Humidity range 30% … 80% r.h.