Standa - Optical Mounts

4LM13 - Self-Centering Lens/Optics Mount

Automatically centres and holds optics from 6 to 40 mm

Easy insertion and removal of optics

Self-Centering Lens/Optics Mount 4LM13 reliably centres and securely holds round optics and cylindrical objects. This device is particularly valuable when lenses of different diameters are being used interchangeably, as repeated centering at constant height is necessary. The Self-Centering Lens/Optics Mount 4LM13 accommodates optics up to 40 mm and is oversized to provide easy finger access for inserting and remaining optics. When released the three arms grip the lens in deep grooved jaws, automatically centering the lens within the holder. The Self-Centering Lens/Optics Mount 4LM13 can mount on STANDA Posts for easy adjustment of vertical height and azimuthal angle.

4LM149 - Universal Adjustable Lens/Optics Mounts

Hold cylindrical objects of various diameters

Three mounting possibilities

Convenient holding of tips not used at the moment

Quick coarse positioning and diameter setting possibility

Made of black anodized aluminium

Universal Adjustable Lens/Optics Mounts 4LM149-10 and 4LM149-05 are used to accommodate any round objects of any thickness like lenses, mirrors and lasers. Three support shafts of holder are assembled with non-rotating V-groove aluminium universal interchangeable tips for lenses mirrors, etc. While not in use the new non-abrasive flat teflon face aluminium tips for lasers are kept in special holes on aluminium support ring. Long objects like cylindrical laser heads can be held by two mounts together with Multiple Mounting Plates 2MP. Each individual adjustable shaft of holder incorporates threaded thumbscrew, sliding sleeve and fixation tool for rough positioning and diameter setting. It is enough to give only a twist thumbscrew of the shaft to provide a fine adjustment travel. Three various mounting holes M4, M6, and Ø6.4, Ø11x4 provides various and easy attachment possibilities to the Tables, Breadboards and the STANDA Rod Holder system.

4LM42 - Adjustable Radius Optics Mounts

For lenses, mirrors, lasers - any round objects

Lenses are easily removed and replaced

Accommodate any lens shape and thickness

An Adjustable Radius Optics Mount 4LM42 provides rigid support and assured orientation for round objects of virtually any thickness and length. Installing optics is easy: set the lower support rods at any desired radius, insert your element, and adjust the top rod downward for secure hold of the optics. Long objects can be held by two holders together with the Multiple Mounting Joist 2MJ63. The black anodized aluminium rings have M6 tapped hole for attachment to any STANDA Stage, Table or Support, including STANDA Mounting Posts 3MP6. The Adjustable Radius Optics Mount 4LM42 has three black finished steel plungers and all of them are screw adjustable. This mount accepts lenses from 6 mm to 40 mm with edge thickness of up to 6.5 mm.

4OCM - Optical Component Mounts
	Optical Component Mounts 4OCM can be used for round, standard dimensions, thin optical elements attachment. Mounts vary in dimensions so as to support diameters from 10 to 50mm (0.5" to 2").Original construction enabled to decrease the mount's dimensions and weight. It has additional fixing holes: one M6 and two Æ4.5 mm. 4OCM is produced of black aluminium.

4FH56 - Multiple Filter Holder
	Multiple Filter Holder 4FH56 allows fixation of up to 6 filters. The thickness of the optical filter or plate to be held is from 2 mm to 6 mm. The Holder is made of black finished steel. Separators are made of plastic. There are M6 tapped mounting holes which allow positioning like letters L or V. Weight: 0.12kg

4H29 - Push Holder

One holder for optics of various sizes

Special method of fixation

Holds optics from 13 to 42 mm diameter.

Holds thin lenses or long-barrel lens assemblies

Push Holder 4H29 holds optics of any shape or configuration: round and rectangular, with negligible loss of clear aperture, even at large angles of incidence. The top support is clamped in position pushing the special place and tightening the knurled screw. This provides gentle but firm fixation. After mounting the component and holder can be exchanged completely as one unit. Three mounting holes are provided in the black finished steel base of the holder. The Push Holder 4H29 can be locked using M6 knurled screws to Translation Stages, Tables or other STANDA elements.
Weight: 0.14kg

4PC69 - Plate Clamp
	Plate Clamp 4PC69 holds thin light-weight plates, like filters, transparencies, resolution targets and razor blades used in knife edge experiments. These black finished steel Clamps may be directly screwed for example to the mounting stud of a Mounting Post 3MP6 or to a Base Plate with Rotary Clamp 3EXC45. Weight: 0.04kg

4PH132 - Universal Plate Holder
	Universal Plate Holder 4PH132 holds long and thick components, and can fix elements from 0 to 12 mm in width. The base of the plate holder has an M6 mounting hole. Weight: 0.07kg

4BC32 - Bar Clamp

Bar Clamp 4BC32 and V-Clamp 4VC41 are used for clamping of components directly to flats like a surface of an optical table or translation stage. The V-Clamp 4VC41 is used to hold round optical elements such as lenses. The Bar Clamp 4BC32 is used to hold prismatic elements like glass blocks, prisms, cells. Clamp adjustment range (maximal gap) is 59 mm. The Bar Clamp 4BC32 and V-Clamp 4VC41 can be mounted anywhere where M6 threaded holes are available.
Weight: 0.07kg

4SC - Spring Clamps

Spring Clamps 4SC are used to clamp components directly to surfaces of optical tables or translation stages. These Clamps are used to hold prismatic elements like glass blocks, prisms, cells. The Spring Clamps 4SC have an M4 external screw and can be mounted anywhere where M4 threaded holes are available.
Weight: 0.02kg