Standa - Lasers

10STA-01 - Diode pumped Nd:LSB microchip solid-state laser
	Solid-state lasers STA produce short pulses at high repetition rates, and of high peak power. This dpss laser consists of a microchip (gain medium bonded to a Cr:YAG saturable absorber). The microchip is end pumped with pig-tailed CW diode laser. STA-01 - produces pulses of first harmonic. (click here and go to STA-01SH if you look for second harmonic DPSS lasers).

10STAD-01 - Laser diode Driver

laser diode driver with two channel temperature controller

operation in CW or pulsed (optional) mode

slow and soft start, typically within 1ms

applying an external electric potential allows to adjust the

diode current, and temperatures of two channels

protection against excessive current, heat, reverse

polarity

feedback photodiode and thermo-resistor circuits

The STAD-01 driver is a laser diode driver with a two channel temperature controller. Designed for safe operation of laser diodes in CW or pulsed mode, it also allows control of the temperature with two independent Peltier TE coolers. Highly-efficient design limits power dissipation and simplifies heat-sinking requirements. STAD-01 driver requires a 5V stabilized power supply (available as option).

10BD - Beam Dump

Beam Dump 10BD01 is designed to block a CW or a pulsed laser beam. It can be used on beams of upto 50 Watts in the wavelength range from 0.1 to 30 µm. The design is such, that, even if the non-reflective coating is damaged by high intensity pulses, there's no backward reflection.

Water-cooled Beam Dump 10BDWC01-2. 10BDWC01 blocks a CW or a pulsed laser beam. It is mainly intended for beams 2 inch wide. Water absorbs much energy. So, the beam dump is best suited for laser beams of over 50 Watts. The wavelength range is from 0.1 to 30 µm. Even if the non-reflective coating is damaged by high intensity pulses, the laser beam is not reflected back into your optical scheme. Laser beam dump mounts on an M6 hole on its back.

CTL-21 - Spectacles and Goggle type
	Working with lasers in entirely safe as long as you apply adequate protection to your eyesight. Otherwise, laser beam impact can induce severe, and often irreversible damage to retina or cornea. Take advantage of our profesional anti-laser spectacles and goggles. They are cmfortable, absoulutely safe (if selected properly), and they provide excellent visibility.

10VIZ-35 - Visualizator

Reflects an invisible beam as its visible second
harmonic
High mechanical durability
High sensitivity to laser radiation

Visualizator 10VIZ-35 is used for visualization of CW or pulsed laser radiation with wavelength 880-1070 nm falls onto the working surface, the latter glows in the second harmonics of the beam. Use this item to adjust and check a shape of a laser beam. It helps to see the structure of a laser beam intensity distribution. Visualizator working surface diameter is 35 mm.

10MPIR1 - Universal Magnetic Drive Micropump with Inner Reservoir

Variable Speed Drive
Inner Reservoir
Chemical inertness
Wetted parts: teflon, nylon, polyamide
Hermetical

Universal Magnetic Drive Micropump with Inner Reservoir 10MPIR1 is used in dye-lasers and picosecond lasers for pumping of the mode-locking dyes. Also micropump is used for cooling of the thermostat's micro-head. The size of the micropump reservoir could be changed according the customer's request.