Via Giuba, 11 20132 Milano
Tel. 02 28314410 - Fax 02 2871777
| | | home | | | chi siamo | | | prodotti | | | informazioni | | | contattaci | | | dove siamo | | |
 |
||||||||||||
|
Via Giuba, 11 20132 Milano Tel. 02 28314410 - Fax 02 2871777 |
|||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
|
|
|
|
| 2OR01 - Aluminium Optical Rails | |
 |
 Easier sliding
and fixing Scale engraved Material: black
anodized aluminium High stability |
| 2OR6 - Steel Optical Rails | |
 |
43 mm wide.
55 to 670mm long M6 mounting
holes Lengthwise or
transverse mounting slots for M6 screws Suitable for
mini steel optical rails system The Optical Rails 2OR6 have low profile and are made of hardened steel.
Optical rails have patterns of M6 tapped holes and of 6.4mm clearance
slots. The holes and slots are used for mounting on optical plates,
on opto-mechanical elements and for interconnections.See related page
10ORS6. |
| 2RC01 - Aluminium Rail Carriers | |
 |
Two locking
options: by integrated spring clip, and by afixing screw Quick and easy
sliding Material: black
anodized aluminium To release and to move, or to lift the carrier you push the lever of the clip. To stop the carrier firlmly, use the fixing screw. Rather than grinding against, and damaging the rail with its tip, the screw gently clamps to the rail the wide tenon of the clip. The clip is preloaded by a spring. Its lever is removable (on the thread). |
| 2RC6 - Steel Rail Carriers | |
 |
The Rail Carriers 2RC6-50, 2RC6-25 may be quickly lifted and set again
on a rail. Slide the carrier to any point on the rail and secure it with
the fixing screw. The carriers have patterns of M6 and Ø6.4mm mounting
holes used to fasten other units. 2RC6-50H has a Ø18mm clear aperture.
An article Mini Optical Rail System 10ORS6 gives examples of use of the
carriers. Precision Carriers 2RC6 come in two widths: 25mm and 50mm. Carrier
2RC6-25 may be used as a reference for repeated positioning. Units, such
as 2RC6-50H, 7T8-01, may be reinserted exactly into the same position
next to the reference carrier. Rail Carriers are made of black finished
hardened steel. |
| 2SRC6-50 - Steel Sliding Rail Carrier | |
 |
Sliding Rail Carrier 2SRC6-50 - a universal platform, which has additional
upper rails orthogonal to lower base rails. The Carrier allows to attach
any unit of 10ORS6 system on the rail 2OR6, to move it easily along the
Optical Rail and to fix it across within ±15mm. The carrier has
a pattern of M6 and Ø6.4 mounting holes. Sliding Rail Carrier is
made of black finished hardened steel. |
| 2SR32 - Silent Rods | |
 |
|
| 2AMB - Adjustable Mounting Block | |
 |
Adjustable Mounting Block 2AMB is a special adjustment unit, which attaches to Standa’s Silent Rods 2SR32. It has a platform with M6 and M4 holes for attachment of optical components. The position of the platform is adjusted by 4 screws in the range of 5° in all angular coordinates. The same screws are used to fix the unit on the Silent Rod. 2AMB is made from black anodized aluminium. |
| 2MP - Multiple Mounting Plates | |
|
|
Multiple Mounting Plates 2MP allow to assemble groups of accessories mounted in close proximity and acting as one unit (e.g. a compound lens). For example, the slot of the plate 2MP allows to mount Lens Holders 4LM149 using M6 screws from beneath. Their positions can be adjusted on the plate. 2MP can be attached to tables, breadboards, and rods at the desired height and orientation. Material - black anodized aluminium. |
| 2MJ63 - Multiple Mounting Joist | |
|
|
Joist 2MJ63 may be used to hold long optical elements kept by two lens mounts (4LM42, 4LM149-10 or 4LM149-05), using M6 screws from beneath on the holes on the ends. 2MJ63 can be attached to tables, breadboards, and rods at the desired height and orientation. Material - black finished steel. |
| 2MAB111 - Mini Angle Brackets | |
|
|
Mini Angle Brackets 2MAB111 are used to increase functions of Mini and Micro series Optical positioners 5BM121 and 5OM111. Model 2MAB111-01 enables to establish any angle of a positioner. 2MAB111-02 also allows height and position adjustment, as it has two 4.2 mm clearance slots. Mini Angle Brackets are made from black anodized aluminium. |
| 2AB128 - Angle Bracket | |
|
|
|
| 2AB163 - Angle Bracket | |
|
|
|
| 2AB164 - Angle Bracket | |
|
|
|
| 2AB167-25 - Angle Bracket | |
|
|
|
| 2AB173-20 - Angle Bracket | |
|
|
|
| 2AB175-100 - Angle Bracket | |
|
|
|
| 2AB175-50 - Angle Bracket | |
|
|
|
| 2AB38 - Angle Bracket | |
|
|
|
| 2AB67-25 - Angle Bracket | |
|
|
|
| 2AB67-6 - Angle Bracket | |
|
|
|
| 2ABM167-25 - Angle Bracket | |
|
|
|
Standa
