Compatible with all Mark-10 test stands and grips.
Reversible aluminum housing for hand use
or stand mounting
Selectable units of measurement
Programmable default configuration
Peak memory for tensile and compressive forces
Push-button calibration
Battery or AC operation
Programmable automatic shutoff
Permanent configuration memory
Optional RS-232, Mitutoyo and analog outputs
Same housing size for capacities from 0.25 lbs
(1 N) to 500 lbs (2500 N)

Accuracy: ± 0.3% of full scale ±1 digit
Sampling rate: 30 readings/sec
Safe overload: 150% of capacity
Battery life: 8-10 hours per charge
Weight: 0.9 lbs (0.4 kg)
Warranty: 1 year

Compatible with all Mark-10 test stands and grips.
RS-232, Mitutoyo and analog outputs
GCL-Gauge Control Language for full computer control
Automatic timed output on RS-232
Dual set points with outputs
Averaging mode for average readings over time
External trigger for contact or switch testing
and data capture
General purpose I/O for external device control
Programmable analog and digital filters
Selectable units of measurement
Programmable default configuration
Peak memory for tensile and compressive forces
Push-button calibration
Battery or AC operation
Programmable automatic shutoff
Reversible aluminum housing for hand use
or stand mounting
Same housing size for capacities from 0.25 lbs
(1 N) to 500 lbs (2500 N)

Accuracy: ± 0.2% of full scale ±1 digit
Sampling rate: 65 readings/sec
Safe overload: 150% of capacity
Battery life: 8-10 hours per charge
Weight: 0.9 lbs (0.4 kg)
Warranty: 1 year

Compatible with all Mark-10 test stands and grips.
Small size
Reversible aluminum housing for hand use
or stand mounting
Peak memory for tensile and compressive loads
Programmable automatic shutoff
Programmable default configuration
Push-button calibration
IPM - Intelligent Power Management system
Selectable units of measurement
Battery or AC operation
Same housing size for capacities from 0.25 lbs
(1 N) to 500 lbs (2500 N)

Accuracy: ± 0.5% of full scale ±1 digit
Sampling rate: 30 readings/sec
Safe overload: 150% of capacity
Battery life: 30 hours of continuous operation
Weight: 0.7 lbs (0.3 kg)
Warranty: 1 year

Compatible with all Mark-10 test stands and grips.
Reversible aluminum housing for hand use
or stand mounting
Selectable units of measurement
Programmable default configuration
Peak memory for tensile and compressive forces
Push-button calibration
Battery or AC operation
Programmable automatic shutoff
Permanent configuration memory
Optional RS-232, Mitutoyo and analog outputs
Same housing size for capacities from 0.25 lbs
(1 N) to 500 lbs (2500 N)

Accuracy: ± 0.3% of full scale ±1 digit
Sampling rate: 30 readings/sec
Safe overload: 150% of capacity
Battery life: 8-10 hours per charge
Weight: 0.9 lbs (0.4 kg)
Warranty: 1 year

Fully interchangeable force and torque sensors
with "personality" modules
Unlimited number of sensors possible due to unique design
Programmable default configuration for each sensor
RS-232, Mitutoyo and analog outputs
GCL - Gauge Control Language for full computer control
Averaging mode for average readings over time
External trigger for data capture and switch testing
Programmable dual set points with outputs
General purpose I/O for external device control
Programmable auto-shutoff
Selectable units of measurement
Push-button calibration
Battery or AC operation
Peak reading memory

Accuracy: ± 0.1% of full scale ±1 digit +sensor
Sampling rate: 65 readings/sec
Battery life: 8 hours per charge
Weight: 0.9 lbs (0.4 kg)
Warranty: 1 year

Member of the BGI family of interchangeable
sensors
"Personality module" holds all calibration
and configuration data
Rugged aluminum housing
Reversible jaws for round or rectangular
containers
Spill proof construction
May be used for torque tool calibration
NIST - traceable calibration certificate included

Accuracy: ± 0.7% of full scale ±1 digit + BGI
Weight: STB10Z-STB50Z - 2.2 lbs (4.8 kg),
STB12-STB100 - 5.4 lbs (2.5 kg)
Warranty: 1 year

Compatible with all Mark-10 force gauges,
accessories and grips
Loading lever can be positioned in 30° increments
for ease of operation
Threaded holes for bench mounting
Adjustable travel stops
Precision ground rack and pinion mechanism
Adjustable wear plates for smooth, precise motion
Optional digital travel display
Friction brake

analysis report
min/max values
Standard deviation
Statistics analysis
Istograms